Manufacturer of Pipe Fittings In Dadar | Maha Bhairav Stainless Steel

Manufacturer of Pipe Fittings In Dadar | Maha Bhairav Stainless Steel

Maha Bhairav Stainless Steel is 5th Largest Manufacturer of ASTM A182 Stainless Steel Flanges in india, we are manufacturing Stainless Steel Flanges since 1999.We are ISO 9001 & 14000 certified Exporter of ASTM A182 Stainless Steel Flanges in india.We maintain over 1200 ton SS Flanges in various shape, sizes coating which makes us one of the largest stockist of ASTM A182 Stainless Steel Flanges in India.In 1985 Maha Bhairav Stainless Steel was incorporated as a trader of ASTM A182 Stainless Steel Flanges in India.

Stainless Steel Flange A/SA 182

Trade Name	Grade	UNS #	Flanges
304	F304	S30400	A182 / SA182
304L	F304L	S30403	A182 / SA182
304H	F304H	S30409	A182 / SA182
316	F316	S31600	A182 / SA182
316L	F316L	S31603	A182 / SA182
316H	F316H	S31609	A182 / SA182
321	F321	S32100	A182 / SA182
321H	F321H	S32109	A182 / SA182
347	F347	S34700	A182 / SA182
347H	F347H	S34709	A182 / SA182
317L	F317L	S31703	A182 / SA182

Carbon Steel Pipe Fittings manufacturer in India | Maha Bhairav Stainless Steel

Carbon Steel Pipe Fittings manufacturer in India | Maha Bhairav Stainless Steel

Maha Bhairav Stainless Steel is 5th Largest Manufacturer of ASTM A420 WPL6/ WPL3 Carbon Steel Pipe Fittings in india, we are manufacturing A420 WPL6 Weld Fittings since 1999.We are ISO 9001 & 14000 certified Exporter of ASTM A420 WPL6/ WPL3 Carbon Steel Pipe Fittings in india.We maintain over 1200 ton A420 Gr WPL3 in various shape, sizes coating which makes us one of the largest stockist of ASTM A420 WPL6/ WPL3 Carbon Steel Pipe Fittings in India.In 1985 Maha Bhairav Stainless Steel was incorporated as a trader of ASTM A420 WPL6/ WPL3 Carbon Steel Pipe Fittings in India. in 1991 became stocking Distributor of ASTM A420 WPL6/ WPL3 Carbon Steel Pipe Fittings.

Standard	Description
ASTM A182/A182M	Forged or rolled alloy steel pipe flanges, forged fittings and valves and parts for high temperature service. Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
ASTM A403/A403M	Wrought austenitic stainless steel piping fittings.
ASTM A815/A815M	Wrought ferritic, ferritic/austenitic and martensitic stainless steel piping fittings.
AS 2129	Flanges for pipes, valves and fittings
ANSI/ASME B1.20.1	Pipe threads, general purpose (inch).
ANSI B16.5	Steel pipe flanges and flanged fittings.
ANSI B16.9	Factory-made wrought steel butt-welding fittings.
ANSI B16.11	Forged steel fittings socket-welding and threaded. Socket Welding and Threaded Forged Fittings
ANSI B16.25	Butt-welding ends.
MSS SP43	Wrought stainless steel butt-welding fittings. Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications
BS21	Threading.
ISO 4144	Stainless steel fittings threaded to ISO 7-1.
MSS SP-95	Swage(d) Nipples and Bull Plugs
BS3799	Specification for Steel pipe fittings, screwed and Socket-welding for the petroleum industry
ANSI – B 16.9 ASTM A403 – ASME SA403	‘Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings’
API 590-605 ASME B16.9	‘Factory-Made Wrought Buttwelding Fittings’
ASME B16.25	‘Buttwelding Ends’
ASME B16.28	‘Wrought Steel Buttwelding Short Radius Elbows and Returns’

Stainless Steel Manufacturers In India | Maha Bhairav Stainless Steel

Stainless Steel Manufacturers In India | Maha Bhairav Stainless Steel

ASTM A182 Stainless Steel Flanges Specifications

Material	Stainless steel: ASTM A 182, ASTM A240 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 S33, 316L, 317, 317L, 321, 347, 347H, 409, 410, 410S, 420, 430
Stainless Steel Flanges Standard	ANSI, ASME, DIN, JIS, EN, GB, BS, GOST
Stainless Steel Flanges Surface	Rust-proof oil, Black, Yellow, Galvanized
Stainless Steel Flanges Type	plate, weld neck, slip on, threaded, lap joint, socket weld, spectacle, integral, orifice and blind
Flange facing	Raised face , Flat face, Ring Joint face, etc
Stainless Steel Flanges Size	DN10-DN2000, 1/4″~80″
Process	forged, ring rolled and heat treatment
Stainless Steel Flanges Pressure	ANSI: 150# 300# 400# 600# 900# 1500# 2500# DIN: PN1.0 PN2.5 PN6, PN10, PN14, PN25, PN40, PN64, PN100, PN160, PN250, PN320, PN400 JIS: B2220(30K) JIS2238(40K, 63K) JIS3451(F15, F12) BS4504: PN6, PN10, PN16, PN25, PN40 EN1092: PN6, PN10, PN16, PN25, PN63, PN100
Stainless Steel Flanges Connection	Welding
Technical	Forged
Package	Wooden case, Cartons, Pallets or crates according to buyer’s requirements.
Certificate	ABS, API, ISO9001, PED
Applications	Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction

ASTM A182 Forged Flanges/Plate Flange

Standard	ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
Size	1/2″ to 36″
Dimensions	ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Class / Pressure	150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.

Manufacturer & Supplier of Steel | Maha Bhairav Stainless Steel

Manufacturer & Supplier of Steel | Maha Bhairav Stainless Steel

Maha Bhairav Stainless Steel

Alloy Steel Pipe Fittings Manufacturers
Alloy Steel Flanges Manufacturer In India
Carbon Steel Pipe Fittings Manufacturers In India
Carbon Steel Flanges Manufacturer In India
Stainless Steel Pipe Fittings Manufacturers In India
Stainless Steel Flanges Manufacturers In India
Manufacturer of Stainless Steel Forged Fittings In India
Alloy Steel Bolt Manufacturers Mumbai
Stainless Steel Nut Bolts Manufacturer India
Stainless Steel Hex Cap Screws Manufacturer
Stainless Steel Forged Flanges
Stainless Steel Blind Flange Manufacturer
Stainless Steel Lap Joint Flanges Manufacturer
Stainless Steel Weld Neck Flange Manufacturer

Specialized Manufacturer of

Stainless Steel Cap Screws
PN10 ANSI B16.47 Flanges
BS 4504 Flanges
BS 10 Flanges
DIN Flanges
ANSI B16.11 Forged Union
MSS SP-79 3000LB 90 Degree Elbow
MSS SP-83 Threaded Equal Tee
BS3799 Forged Reducer
Stainless Steel Pipe fittings
ANSI B16.5 Class 300 Plate Flange
ANSI B16.5 Class 600 SWRF Flange
ANSI B16.47 Class 900 Flanges Manufacturer
MSS SP-44 Class 1500 Flanges Exporter in India
EN 1092-1 Flanges
Low Alloy Steel Buttweld Fittings
ASTM A105 Carbon Steel Flanges
Stainless Steel Forged Fittings

Manufacturer of Stainless Steel in Mumbai | Maha Bhairav Stainless Steel

Manufacturer of Stainless Steel in Mumbai | Maha Bhairav Stainless Steel

ASTM A182 Stainless Steel Flanges Manufacturers In India, ASTM A182 Stainless Steel Flanges Suppliers In India, ASTM A182 Stainless Steel Flanges Exporters In India

ASTM A182 F316 Plate Flange suppliers, ASTM A182 F316 Weld Neck Flange manufacturers, ASTM A182 F316 Slip On Flange, ASTM A182 F316 Threaded Flange, 316 Stainless Steel Flanges manufacturers, ASTM A182 F316 Forged Flange, ASTM A182 F316 Blind Flange, ASTM A182 Stainless Steel Flanges distributors In India, ASTM A182 Stainless Steel Flanges traders In India.

A182 F316 Stainless Steel Flanges Suppliers – Slip On, Weld Neck, Blind Flanges, Plate Flanges Exporter, Manufacturer of SS Flange, ASTM A182 Stainless Steel 316 Flanges Suppliers, Exporter of Stainless Steel Flanges, ASTM A182 F316 FLANGES As Per ANSI B16.5, BS10 TABLE D, TABLE E, DIN Standard Flanges, ASTM A182 Stainless Steel Flanges stockist in india, ASTM A182 Stainless Steel Flanges stockholder in india, ASTM A182 Stainless Steel Flanges wholesaler in india

ASTM A182 Stainless Steel Flanges Manufacturer In India

Manufacturer of Stainless Steel Flanges in India, AISI 304, 304L, 316L ANSI B16.5, DIN Standard, Table D, E , ASTM A182 Stainless Steel Flanges Manufacturer in India

Call: +91-022-66109829 | Send Mail: mahabhairavstainless@gmail.com

Supplier Of Stainless steel pipe in Mumbai | Maha Bhairav Stainless Steel

The Manufacturing Process

The manufacture of stainless steel involves a series of processes. First, the steel is melted,

To make stainless steel, the raw materials—iron ore, chromium, silicon, nickel, etc.—are melted together in an electric furnace. This step usually involves 8 to 12 hours of intense heat. Next, the mixture is cast into one of several shapes, including blooms, billets, and slabs.

and then it is cast into solid form. After various forming steps, the steel is heat treated and then cleaned and polished to give it the desired finish. Next, it is packaged and sent to manufacturers, who weld and join the steel to produce the desired shapes.

Melting and casting

1 The raw materials are first melted together in an electric furnace. This step usually requires 8 to 12 hours of intense heat. When the melting is finished, the molten steel is cast into semi-finished forms. These include blooms (rectangular shapes), billets (round or square shapes 1.5 inches or 3.8 centimeters in thickness), slabs, rods, and tube rounds.

Forming

2 Next, the semi-finished steel goes through forming operations, beginning with hot rolling, in which the steel is heated and passed through huge rolls. Blooms and billets are formed into bar and wire, while slabs are formed into plate, strip, and sheet. Bars are available in all grades and come in rounds, squares, octagons, or hexagons 0.25 inch (.63 centimeter) in size. Wire is usually available up to 0.5 inch (1.27 centimeters) in diameter or size. Plate is more than 0.1875 inch (.47 centimeter) thick and over 10 inches (25.4 centimeters) wide. Strip is less than 0.185 inch (.47 centimeter) thick and less than 24 inches (61 centimeters) wide. Sheet is less than 0.1875 (.47 centimeter) thick and more than 24 (61 centimeters) wide.

Heat treatment

3 After the stainless steel is formed, most types must go through an annealing step. Annealing is a heat treatment in which the steel is heated and cooled under controlled conditions to relieve internal stresses and soften the metal. Some steels are heat treated for higher strength. However, such a heat treatment—also known as age hardening —requires careful control, for even small changes from the recommended temperature, time, or cooling rate can seriously affect the properties. Lower aging temperatures produce high strength with low fracture toughness, while higher-temperature aging produces a lower strength, tougher material.Though the heating rate to reach the aging temperature (900 to 1000 degrees Fahrenheit or 482 to 537 degrees Celsius) does not effect the properties, the cooling rate does. A post-aging quenching (rapid cooling) treatment can increase the toughness without a significant loss in strength. One such process involves water quenching the material in a 35-degree Fahrenheit (1.6-degree Celsius) ice-water bath for a minimum of two hours.

Descaling

4 Annealing causes a scale or build-up to form on the steel. The scale can be removed using several processes. One of the most common methods, pickling, uses a nitric-hydrofluoric acid bath to descale the steel. In another method, electrocleaning, an electric current is applied to the surface using a cathode and phosphoric acid, and the scale is removed. The annealing and descaling steps occur at different stages depending on the type of steel being worked. Bar and wire, for instance, go through further forming steps (more hot rolling, forging, or extruding) after the initial hot rolling before being annealed and descaled. Sheet and strip, on the other hand, go through an initial annealing and descaling step immediately after hot rolling. After cold rolling (passing through rolls at a relatively low temperature), which produces a further reduction in thickness, sheet and strip are annealed and descaled again. A final cold rolling step then prepares the steel for final processing.

Cutting

5 Cutting operations are usually necessary to obtain the desired blank shape or size to trim the part to final size. Mechanical cutting is accomplished by a variety of methods, including straight shearing using guillotine knives, circle shearing using circular knives horizontally and vertically positioned, sawing using high speed steel blades, blanking, and nibbling. Blanking uses metal punches and dies to punch out the shape by shearing. Nibbling is a process of cutting by blanking out a series of overlapping holes and is ideally suited for irregular shapes.Stainless steel can also be cut using flame cutting, which involves a flame-fired torch using oxygen and propane in conjunction with iron powder. This method is clean and fast. Another cutting method is known as plasma jet cutting, in which an ionized gas column in conjunction with an electric arc through a small orifice makes the cut. The gas produces extremely high temperatures to melt the metal.

Finishing

6 Surface finish is an important specification for stainless steel products and is critical in applications where appearance is also important. Certain surface finishes also make stainless steel easier to clean, which is obviously important for sanitary applications. A smooth surface as obtained by polishing also provides better corrosion resistance. On the other hand, rough finishes are often required for lubrication applications, as well as to facilitate further manufacturing steps.Surface finishes are the result of processes used in fabricating the various forms or are the result of further processing. There are a variety of methods used for finishing. A dull finish is produced by hot rolling, annealing, and descaling. A bright finish is obtained by first hot rolling and then cold rolling on polished rolls. A highly reflective finish is produced by cold rolling in combination with annealing in a controlled atmosphere furnace, by grinding with abrasives, or by buffing a finely ground surface. A mirror finish is produced by polishing with progressively finer abrasives, followed by extensive buffing. For grinding or polishing, grinding wheels or abrasive belts are normally used. Buffing uses cloth wheels in combination with cutting compounds containing very fine abrasive particles in bar or stick forms. Other finishing methods include tumbling, which forces
The initial steel shapes—blooms, billets, slabs, etc.—are hot rolled into bar, wire, sheet, strip, and plate. Depending on the form, the steel then undergoes further rolling steps (both hot and cold rolling), heat treatment (annealing), descaling Ito remove buildup), and polishing to produce the finished stainless steel. The steel is then sent the end user.
movement of a tumbling material against surfaces of parts, dry etching (sandblasting), wet etching using acid solutions, and surface dulling. The latter uses sandblasting, wire brushing, or pickling techniques.

Alloy Steel Manufacturer Pipe In Khetwadi | Maha Bhairav Stainless Steel

Maha Bhairav Stainless Steel is a growing manufacturing company in the field of chrome moly steel fittings, alloy steel buttweld fittings, alloy steel forged fittings, alloy steel swage nipples, and alloy steel branch outlet fittings. Our stock includes alloy steel pipe fittings in a complete range of sizes and pressure ratings. All fittings are manufactured in India, with raw materials coming from reputed Mills in India and overseas.

Alloy Steel Pipe Fittings Price List

Alloy steel astm a234 wp11 forged fitting
FOB Price: US $1-10 / Piece
Angle 45 pipe fitting a234 wp11 ASTM seamless type
FOB Price: US $0.1-500 / Piece
ASTM A234 WP11 Alloy Steel Pipe Fitting 180 Degree Elbow
FOB Price: US $1-8800 / Piece
Good price Butt Welding astm a234 wp11 alloy pipe fitting
FOB Price: US $6-236 / Piece
ASTM ASME/A234 Elbow/pipe fittings
FOB Price: US $1-50 / Piece
A234 Pipe Fittings,butt welded pipe fittings,elbow,tee,reducer,cap etc
FOB Price: US $0.1-1000 / Piece
PIPE FITTINGS ASTM B16.9 AS A234 WP11 EQUAL TEE
FOB Price: US $499.0-500.0 / Units
ASTM A234 WPB, WPC, WP11, WP12, WP22, WP5, WP9, WP91 Fittings and Flange
FOB Price: US $50-100 / Piece
ASTM A234 Carbon steel pipe fitting
FOB Price: US $1-200 / Piece
A234 gr wp11 elbow fittings 45 degree elbow carbon steel
FOB Price: US $1-100 / Piece
ALLOY STEEL ELBOW PIPE FITTINGS ASTM A234 WP1/WP5/WP9/WP11/WP12/WP22 ASME B16.9
10 Pieces (Min. Order)
ASTM A234WP11 steel pipe fitting 90deg elbow
FOB Price: US $1-400 / Piece
Seamless welded alloy steel fittings
FOB Price: US $1-800 / Piece
Forge steel astm a234 wp11 butt weld pipe fitting
FOB Price: US $1-10 / Piece
DN 450 sch5 astm a234 wpb schedule 40 steel pipe fitting with plain end
FOB Price: US $1-99 / Piece
Astm a234 Wp11 Alloy Steel Pipe Fitting 90d Elbow Lr Bw Smls
FOB Price: US $0.1-100 / Piece
ASTM A234 WP11 alloy steel butt welded pipe fittings
FOB Price: US $700-800 / Ton
ASTM a234 wp11 steel pipe fitting 90d elbow lr bw smls
FOB Price: US $0.015-70 / Piece
ASTM a234 wp11 tube fitting
FOB Price: US $1600-2400 / Metric Ton
ASTM A234 WP1/WP5/WP11/WP22/WP91 pipe cap
FOB Price: US $1-999 / Piece
ASTM A234 WP11 90 deg BW 3″ sch 80 alloy steel seamless elbow
FOB Price: US $0.1-200 / Piece
ANSI B16.25 A234 WP11 SCH 10 API 45 degree pipe fitting lateral tee
FOB Price: US $0.5-150 / Piece
ALLOY STEEL SEAMLESS TEE ASTM A234 WP11 carbon steel pipe fitting reducer elbow tee
FOB Price: US $0.1-1 / Piece
ASTM A234 WP1/WP5/WP11/WP22/WP91 pipe cap
FOB Price: US $10-100 / Piece
butt weld carbon steel pipe end cap astm a234 wp5 , wp11 , wp9 , wp22 , wp91
FOB Price: US $0.1-100 / Piece
ASTM A234 WP11 butt welding tee
FOB Price: US $1-1000 / Tonne
ELBOW 45 deg , LR BW SMLS SCH 80S, ASME B16.9, ASTM A234,Gr.WP11 CL.1
FOB Price: US $1.0 / Piece
ECC.REDUCER CARBON STEEL ASTM A234 WPB WP11 WP22
FOB Price: US $500-1500 / Ton
ASTM A234 WP11 induction elbows Steel elbow
FOB Price: US $0.14-999 / Piece
ASTM A234 WPB Carbon Steel Reducer Eccentric/Concentric
FOB Price: US $1-5000 / Piece
material ASTM A 234 WP11/22/1 carbon steel elbow
FOB Price: US $10-1000 / Piece
ASTM A234 WP11 Pipe Fittings Carbon Steel Elbow
FOB Price: US $0.9-99 / Piece
carbon steel seamless pipe fitting astm a234 wpb wp1 wp5 wp9 wp11 wp12 wp22 wp91 wp92 wphy-42 wphy-52 wphy-60
FOB Price: US $0.072-70 / Piece
alloy steel astm a234 wp11 forged pipe fitting
FOB Price: US $1-10 / Piece
astm a234 wp11 alloy steel equal tee pipe fittings
FOB Price: US $6-236 / Piece
astm a234 wp11 cl. 2 bw tube fittings
FOB Price: US $0.1-1000 / Piece
ASTM A234WP91 alloy steel pipe fitting 90deg elbow
FOB Price: US $1-400 / Piece
astm a351 pipe fittings, ASTM A234 Gr. WPB ANSI B16.9,SCH40
FOB Price: US $0.2-150 / Piece
Seamless alloy steel pipe fitting A234WP11
FOB Price: US $0.5-500 / Piece
A234 WP11 45 degree pipe fitting lateral y tee for power generation
FOB Price: US $0.5-150 / Piece
Astm a234 Wp11 Alloy Steel 90d Elbow
FOB Price: US $0.1-100 / Piece
ASTM A234 WP1/WP5/WP11/WP22/WP91 carbon steel pipe cap
FOB Price: US $10-100 / Piece
ASTM A234 WP11 butt welding tee
FOB Price: US $1-1000 / Tonne
High quality astm a403 wp 347 elbow
FOB Price: US $0.5-10000 / Piece
Butt weld astm a234 wp11 alloy steel pipe fitting
FOB Price: US $1-10 / Piece
ASTM A234 WP11 Alloy steel elbow pipe fitting
FOB Price: US $6-236 / Piece
Chrome Moly ButtWeld Fittings ASTM A234 WP11 Pipe Fittings
FOB Price: US $0.1-10 / Piece
ASTM A234 wp11 elbow
FOB Price: US $0.1-300 / Piece
ASTM A234 ASME SA234 WP11 alloy steel pipe fittings
FOB Price: US $0.1-10000 / Piece
ASTM A234 WP1/WP5/WP11/WP22/WP91 carbon steel pipe cap
FOB Price: US $1-999 / Piece
butt welding ASTM B16.9 A234 WP11 concentric reducer
FOB Price: US $400-900 / Ton
Alloy Steel ASTM A234 Grade WP11 fittings
FOB Price: US $0.5-50 / Piece
A234 WPB Steel Bend 1/2″-24″ CE certificates
FOB Price: US $0.3-1500 / Piece
A234 gr wp11 elbow in cangzhou
FOB Price: US $0.1-300 / Piece
ASTM A234 wp5 wp9 wp11 pipe fittings
FOB Price: US $1.0 / Piece

Manufacturer for Stainless steel pipe in Mumbai | Maha Bhairav Stainless Steel

Alloy Steel Pipe Fittings Manufacturer in India

ASTM A234 Wpb, ASTM A234 Gr Wpb, ASTM A234 Fittings Manufacturers in India, Alloy Steel Pipe Fittings Manufacturers,
Call: +91-022-66109829 | Send Mail: mahabhairavstainless@gmail.com

An ISO 9001:2008 Certified Company, Maha Bhairav Stainless Steel is one of the leading Alloy Steel Pipe Fittings Manufacturers, engaged in the manufacture and distribution of ASTM A234 WP11 Elbow, ASTM A234 WP11 Tee suppliers in India, ASTM A234 WP11 Reducer,

ASTM A234 WP11 Pipe Bend, ASTM A234 WP11 Long Radius Bend, ASTM A234 WP11 Lateral Tee manufacturers, alloy steel galvanized pipe fittings schedule 40, Alloy Steel Pipe Fittings Manufacturers, ASTM A234 WP11 Buttweld Fittings manufacturer, ASTM A234 WP11 Weld Fittings suppliers, alloy steel galvanized pipe fittings manufacturers.

Maha Bhairav Stainless Steel is 5th Largest Manufacturer of alloy steel pipe fittings in India, we are manufacturing alloy steel pipe fittings since 1999. We are ISO 9001 & 14000 certified Exporter of alloy steel pipe fittings in india.We maintain over 1200 ton Alloy Steel Buttweld Fittings in various shapes, sizes coating which makes us one of the largest stockist of alloy steel pipe fittings in India.

In 1985 Maha Bhairav Stainless Steel was incorporated as a trader of alloy steel pipe fittings in India. in 1991 became stocking Distributor of alloy steel pipe fittings.later in year 1994 Maha Bhairav Stainless Steel became well known Supplier of alloy steel pipe fittings in India.

Further, we started Exporting of alloy steel pipe fittings and becomes 6th Largest Exporter of alloy steel pipe fittings in india, China, Japan & Europe.In year 1999, Maha Bhairav Stainless Steel became largest stockholde of alloy steel pipe fittings in India.

Currently we are improving our traders of alloy steel pipe fittings in india, wholesaler of alloy steel pipe fittings in india, and importer of alloy steel pipe fittings in india and also in wold wild with best Quality and an affordable price to fulfill emerging customer needs.

Heat Treatment Procedures – fittings, after forming at an elevated temperature below the critical range under suitable conditions to prevent injurious defects caused by too rapid cooling, but in no case more rapidly than the cooling rate in still air. Heat treatment temperature specified are metal (part) temperatures. Heat- treatment fittings shall be treated according to paragraph 7 in specification A960/A960M.

WPB, WPC, and WPR fittings over NPS 12, produced by locally heating a portion of the fitting stock to any temperature for forming, shall be subsequently annealed, normalized, or normalized and tempered.

fittings such as elbows tees, header tees, reducers and lap joint stub ends with a carbon content less than 0.26%, NPS 12 and under, shall not require heat treatment after forming a locally heated portion of the fitting.